Supply SCADA data to any OPC client using the OPC Standard
Multiple Project Support
Supports OPC DA 2.05 (Data Access)
FlexOPC Client
Get data from other systems which support OPC server
Multiple Project Support
Support for Redundant OPC Servers
Supports OPC DA 2.05 (Data Access)
Software FlexOPC for RealFlex 6.x
FlexOPC Client for RealFlex 6 (RF6-MS-FOPC-C200)
When RealFlex6 requests data from an OPC server on a Microsoft Windows machine, this module must be used. FlexOPC Client for RealFlex 6 has 2 components: FlexOPC Client is installed on a Microsoft Windows PC and an OPCclient driver for QNX, called ipscan, is installed on a RealFlex 6.x SCADAPC. This allows RealFlex 6.x SCADA system to get data from another system with an OPC Server.
FlexOPC Client Driver for Realflex 6 (ipscan) (RF6-QNX-FOPC-C200)
When multiple RealFlex systems are to be connected to an OPC server, then multiple OPC Client Drivers must be installed.
FlexOPC Server for RealFlex 6 (RF6-MS-FOPC-S200)
When an OPC Client on a Microsoft Windows machine requests data from RealFlex, this module must be used. FlexOPC Server has 2 components; FlexOPC Server for RealFlex 6 is installed on a Microsoft Windows PC and an OPC Server driver for QNX, called opcserv, is installed on a RealFlex 6.x SCADA PC. This allows other systems with OPC Client to get data from the RealFlex 6.x SCADA system
FlexOPC Server Driver for Realflex 6 (opcserv) (F6-QNX-FOPC-S200)
When multiple RealFlex systems are to transfer data using OPC then each RealFlex system must have the OPC Server Driver installed.
Software FlexOPC for RealFlex 4.x
FlexOPC Client for RealFlex 4 (FOPCC200)
FlexOPC Client has 2 components FlexOPC Client is installed on a Microsoft Windows PC and Copcscan installed in a RealFlex 4.3x SCADA PC. This allows data from another system with OPC Server to transferred its data to the RealFlex 4.x SCADA system. QNX TCP/IP Socklet w/o NFS is required.
FlexOPC Server for RealFlex 4 (FOPCS200)
FlexOPC Server has 2 components FlexOPC Server is installed on a Microsoft Windows PC and Copcserv installed in a RealFlex 4.3x SCADA PC. This allows other systems with OPC Client to get data from the RealFlex 4.x SCADA system. QNX TCP/IP Socklet w/o NFS is required.
FlexOPC Client for RealFlex 6 (RF6-MS-FOPC-C200)
